Z Microsystems GCS17T Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 34

Z Microsystems GCS17T Скачать руководство пользователя страница 15

27-0043UM REV A 03/10

15

This following section explains how to use the control buttons to adjust, image clarity and
image position on the screen. In particular it discusses:

• The function of each of the push-button controls

• How to reset previously saved settings or return to factory settings

• Tips and techniques

toUCH SCrEEn SEtUp

Z Micro GCS Displays utilize a Hampshire TSHARC (acquired by Microchip) touch screen
controller chip. To use the display touch screen functionality, the touch screen driver must
be installed on a host computer. In addition, communication between the display and the
touch host computer must be active via the USB interface.

Please visit http://www.zmicro.com/downloads/software.html for a list of the latest drivers
and a link to the manufacturer’s web site.

DiSpLaY panEL SEtUp

NOTE: The control buttons allow

the user to control backlight

operations; to store settings,

and to revert to factory-saved

settings.

opErationS

NOTE: If the touch screen option has

been purchased for the GCS,

the touch screen manufacturer’s

software must first be installed

on the computer being used

with the GCS. Follow

manufacturer’s instructions

and user manual for software

installation and use.

«
...
13
14
15
16
17
...
»

Содержание GCS17T



































Отзывы:

Нет отзывов