Z GRILLS ZPG-L600D, Руководство пользователя

Страница: 14 / 30

12
3. MOUNTING THE HOPPER TO THE CHAMBER
1. Insert Bolt (C) into Hopper Burner Lid (6) and Hopper Assembly (7), align the holes, then
assemble it with Nut (J). Use the Screwdriver (R) to tighten.
2. Assemble Hopper Handle (8) to Hopper Assembly (7) with Bolt (A).
3. Assemble Hopper Assembly (7) to Grill Chamber Assembly (1) with Bolt (A).
4. Locate the RTD Male Plug-In-Connector coming from the Grill Chamber Assembly. It will
look like a loose wire with a connector on the end. Locate Connect the RTD Female
Plug-In-Connector coming from the Hopper Assembly. Connect the two RTD
Plug-In-Connectors together. Pull the RTD wire down so that it is sandwiched between the
hopper and the chamber. The extra RTD wire will be at the bottom of hopper.