Z GRILLS ZPG-700D2, Руководство пользователя

Страница: 15 / 29

13
6.MOUNTING THE HOPPER TO THE CHAMBER
1.Remove the 4 Gaskets and Bolts from the Hopper, open the Lid, insert the Hopper into the
Chamber, then using these Bolts and Gaskets install it in sequence from inside.
2. Locate the RTD plug-in connector coming from the mounted RTD inside the grill frame.
Connect this with the mating connector located on the outside of the hopper burner
assembly. NOTE: excess wire on the RTD plug should remain outside the Chamber.
7.ATTACHING THE HOPPER BURNER LID DOOR HANDLE
Keep the Hopper Burner Lid (18) open. Insert the Bolt (G) into Gasket (F) and the hole on
the Hopper Burner Lid (18) from inside. Hopper Lid Handle (A) from the outside and tighten
the Bolts (G) with screwdriver (K), as shown.