60
63
Insert Hopper Assembly I(
61
) into Hopper
Bottom Cover
(
3
), align the holes. Insert
the
5
/
32
-
32
*
6mm
Bolts(
60
) through the holes in the Hopper and
5
/
32-32 Kep
Nuts(
63
), then open the Hopper Lid and tighten it from inside. The four sides are
installed in the same way.
3
.
Assembling
of Hopper
Remove the Gaskets and Bolts from the Hopper, open the Lid, insert the Hopper into
the Chamber, then using
these
Bolts and Gaskets install it in sequence from inside.
5
.
Mounting
the
Hopper
to
the
Chamber
Uplift the Chamber(1) on the Body Frame(4). Make sure that the Chamber(1) is
between the left and right plate of the Frame(4). Align the Chamber holes with the
plate holes and secure with 1/4-20*12mm Bolt(52).
4.POSITIONING THE CHAMBER ON THE BODY FRAME:
3
61
6.ATTACHING THE HOPPER BURNER LID DOOR HANDLE:
Keep the Hopper Burner Lid(19) open. Penetrate the 5/32-32*5MM Bolt(58) into
Ø
12
*Ø
4
.
2
*
1
.
0mm Gasket(57) and the hole on the Hopper Burner Lid(19) from inside.
Tight the Bolt with screwdriver.
58
9
8
