7
6
1
.
ASSEMBLING
OF
BOTTOM
BASE
:
1.Upside down the bottom base, install the wheel(without brake) into the screw
hole, then tighten the wheel by wrench(59). Note: The 2 wheels without brake
should be installed at the same side
.
2.Install the wheel(with brake) into the screw hole, then tighten the wheel by
wrench(59). Note: The 2 wheels with brake should be installed as the same side.
2.MOUNTING THE BODY FRAME:
1.Secure Left Plate(40)on the Platform(50)with1/4-20*12mm Bolt(52).
2.Secure Right Plate(45)on the Platform(50)with1/4-20*12mm Bolt(52).
3.Secure Back Plate(44)on the Platform(50)with1/4-20*12mm Bolt(52) and link
with Left Plate(40) and Right Plate(45).
4.Locate the Beam(42) between Left Plate(40)and Right Plate(45) with
1/4-20*12mm Bolt(52).
