62
1
.
MOUNTING
THE
BODY
FRAME
TO
THE
CHAMBER
:
1.)With the help of another person, put the Chamber on carboard, then attach 2 Left
Legs(38) to Chamber(1) with1/4-20*12mm Bolt(46), Φ
6.5*
Φ
10
*
1
.
2mm
Spring Washer
(60) and
Φ
6.5*
Φ
10
*
1
.
0mm Gasket(57)
. As shown in Figure1. Caution: The grill is very
heavy. Always lift the grill with 2 people. ( Do not over tighten the Bolts.)
2).Attach Right Rear Leg(41) and Right Front leg(42) on the Chamber(1) by using
1/4-20*12mm Bolt(46) through Φ
6.5*
Φ
10
*
1
.
2mm
Spring Washer
(60) and
Φ
6.5*
Φ
10
*
1
.
0mm Gasket(57)
.
As
shown
in
Figure1.(Do not over tighten the Bolts.)
3).Attaching bottom plate(37) on 4pcs legs by using 1/4-20*12mm Bolts(46), keep it
steady. As shown in Figure 2.
4).Attach Axle(44) go through the holes of Right Rear Leg(41) and Right Front Leg(42).
Attaching 13
25 2
Gaskets(56) for right side and left side, then assembly
respectively Wheels(43), 8 5
25 2
Gaskets(47), Spring Washers(45) and Gap
Nuts(51), after that using wrench to tighten them. As shown in Figure 3.
Φ
*Φ
*
mm
Φ . *Φ
*
mm
4
46
60
57
46
7
6
