Z GRILLS ZPG-1000D, Руководство пользователя

Страница: 10 / 25

8
4.POSITIONING THE CHAMBER ON THE BODY FRAME
1.Remove the two Protection Bar under the Grill Chamber (1) with screwdriver.
2.Remove Bolts (A) from the Grill Chamber (1). Lift up the Grill Chamber (1) on the Body
Frame. Make sure that the Grill Chamber (1) is between the left and right plate of the Frame.
Align the Chamber holes with the plate holes and secure with Bolt (A).
5.MOUNTING THE HOPPER TO THE CHAMBER
1.Open the Lid, insert the Hopper into the Chamber, then using the Bolts (E) and Gaskets (F)
install it in sequence from inside. Note: the upper pair of Bolts and Gaskets need to be
threaded through the Grease Drain Pan Support (51).
2. Locate the RTD plug-in connector coming from the mounted RTD inside the grill frame.
Connect this with the mating connector located on the outside of the hopper burner
assembly. NOTE: excess wire on the RTD plug should remain outside the Chamber.