21
17. Grill Repair Instructions
Component
Time
Di
ffi
culty
Spare Parts
Tools Required
Fuse
5 min
!
3A M205 Slow Blow
Fuse 5 x20mm *
✓
Phillips head screw driver
✓
Wire snips or scissors
Temperature
Sensor
5 min
!
ZG-700-TSENSOR
✓
Phillips head screw driver
✓
Pliers or small socket/spanner
set
Control Board
20-30 min
!!
ZG-CONT
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Pliers
Fire Pot Fan
20-30 min
!!
ZG-FPFAN
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Pliers
Ignition Rod
30-40 min
!!!
ZG-IROD
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Wide Pliers or Small socket
set
Auger Motor
30-40 min
!!!
ZG-AMOTOR
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Pliers
* This is standard type of fuse widely available from electrical suppliers and retailers.
DANGER!
• HIGH VOLTAGE: Unplug the grill from electric power supply before completing
any repairs. Only plug into power once all repairs are complete and covers
back in place.
Questions?
•
Send a product support request on our website. (BEST OPTION)
•
Contact Z Grills Australia customer support at [email protected]
•
All key components can be replaced DIY by a “handy person”.
•
If a handy person is not available to complete the repairs, a BBQ repair shop,
mechanical or electrical equipment repairer should be able to complete the work.
•
Do not complete any repair work yourself unless suitably experienced and
confident to do so.
•
Refer to the table below for estimated time, di
ffi
culty, parts and tools required.
•
How to repair videos are available on our website.
