Z-EDGE R1, Руководство пользователя

Страница: 11 / 48

-9-
2.7 Default Settings
2.8 Factory Reset
Menu
Resolution
Audio Recording
Loop Recording
Date Stamp
Device Auto Off
G-Sensor
Logo Stamp
Parking Mode
Screen Auto Off
WDR Options
1080P+1080P, 1296P+1080P
On/Off
1min,3mins,5mins
On/Off
Off,1min,3mins,5mins
Off,Low,Normal,High
On/Off
On/Off
Off,1min,3mins,5mins
On/Off Default
1296P+1080P
On
3mins
On
1min
Normal
On
Off
3mins
On Drive
1296P+1080P
On
3mins
On
1min
Normal
On
On
1min
On Scenic
1296P+1080P
On
5mins
Off
3mins
Low
On
On
Off
On Park
1296P+1080P
On
1min
On
1min
High
On
On
1min
On
There are three preset scenario modes for everyday driving, scenic driving or
when the vehicle is parked. These aim to offer the optimum settings for the best
video recording in each of these instances.
You can choose to enable any one of these modes from the settings menu.
General Settings > Scenario Mode > Default / Drive / Scenic / Park
To reset the dashcam to factory default
Soft Reset
1. If the device is recording, short press the 'OK' button (11) to stop recording, and
enter Standby Mode.
2. Press the 'Menu' button (8) to enter the General Settings menu.
3. Press the 'Up' and 'Down' buttons (9 & 10) to select Restore Factory Settings.
4. Press the 'OK' button (11) to select.
5. Press the 'Up' and 'Down' buttons (9 & 10) to select confirm.
6. Press the 'OK' button (11) to select.
Hard Reset
If the dash camera does not respond, you can force a factory reset using the reset
button. To reset the dashcam to the factory default settings, long-press the 'Reset'
button (1) until the dashcam’s screen turns off.