7
”
Digital Photo Frame
- 11 -
- Alarm enable : When it is set to
“
on
”
, the function of
“
alarm
”
is activated;
- Alarm time : Set the alarm time
- Power on enable : When it is set to
“
on
”
, the function of
“
timer power on
”
is activated
- Power off enable : When it is set to
“
on
”
, the function of
“
timer power off
”
is activated
- Set time : Set the time of
“
Power on
“
or
“
Power off
”
Q. Firmware upgrading
1. Copy the firmware in a USB flash drive without any file in it.
2.
Insert it into the photo frame, press the button of
“
photo
”
on remote control, then the firmware
will be loaded to the photo frame;
please don
’
t shut down it during upgrading;
3. When the upgrade is finished, it will reboot; after that , you should delete the firmware in USB
flash drive otherwise the firmware will be upgraded again.
