Z Corporation ZScanner 700, Руководство пользователя

Страница: 21 / 48

19
General Concepts
File Types
.CLF
CLF is the license that makes ZScan functional. A specific license is required for
each ZScanner 700 sensor.
.CST
CST file contains configuration data unique to each ZScanner 700 sensor. The
file includes calibration parameters and information needed to create a new
session.
.CSF
CSF file contains all the data related to a previously saved session such as the
scans, the resolution parameters, the deleted facets, etc.
.STL
STL files are used to export facets. This format can be read or processed by
most post-treatment software.
.TXT
TXT files are used to save data in ASCII files. The positioning model containing
all the positioning features is saved under this format.
.OBC
.
OBC files are used to import photogrammetry positioning models acquired with
AICON 3D Systems software.
Positioning Features
To position itself in space, the ZScanner 700 sensor uses a positioning model
which is a combination of many positioning features. These correspond to the
positioning targets that were affixed on the object before scanning. The
positioning model can be built before scanning the surface. To do so, select the
“Scan Features” mode in the software. It can also be built during data acquisition
by selecting the “Scan Surface” mode. While scanning, every positioning targets
acquired by the ZScanner 700 will be added to the positioning model. Each
positioning targets can be activated, deactivated or deleted from the positioning
model. Note that a deactivated positioning target is no longer included in the
calculation of the sensor position or orientation.