85063 Spectrum Z510 Preventative Maintenance Procedure 6/12
Install the septum
(septa).
Note – you will have
to insert the L
shaped connector in
the hole first by
holding it on an
angle, and then
straighten it out as
the connection area
passes the hole.
Make sure each has
the plastic washer
attached.
Hold the septa in
place, and attach
all four e-ring clips.
Loop the yellow tube
over the top of the
clear. This lessens
the amount of
pinching force on the
base of the yellow
tube. Some
carriages may have
the yellow tube going
under the clear.
If so, please re-route
at this time.
Re-attach the binder
tubes
