Z-Com ZMAX-8210-E, Руководство пользователя

Страница: 18 / 49

If you fail to obtain IP address for the ZMAX-8210, the CPE will turn to the client
address for use.
Wireless Parameters
Opening
“
Radio Settings can lead you to the ZMAX-8210 wireless parameters. You can set what you
desire.
Figure 10 ZMAX-8210 Wireless Parameters
Base Station ID
：
This field allows you to enter the Base Station ID you want to connect, to establish
a tie between this CPE and the Base Station.
Duplex Mode
：
This field allows you to have the options of TDD and HFDD modes.
Under the Duplex Mode, you are required to keep the consistency in setting between
the ZMAX-8210 and the Base station.
Center Frequency
：
This field helps you to scan the center frequency that the linked device performs
and shows the frequency in this field.
CP Size
：
This field displays the ratio of hardware MTU (maximum transmission unit) before
rotating this device.
Bandwidth
：
This field provides the bandwidth when this device is undertaking tasks. You can get
two options-- 3.5MHz and7MHz.
Note
：
Note
：
The bandwidth shall be in the complete accord between the ZMAX-8210 and the
Base Station connected.
Frame Length
：
This field displays the frame length that the ZMAX-8210 can obtain from other
Chapter 3 Basic Settings - 12 -