Chapter 4 Advanced Settings
Advanced Wireless Settings
Open “
Radio
” in “
Wireless
” and turn to “
Advanced Parameters
” at the bottom to make advanced
wireless settings.
Figure 24 Advanced Parameters
CPE Download Speed
Specify fractional data rates (× 64Kbps). It allows the administrator to control the amount of data
rate each user is receiving. This is only available in CPE mode.
RTS Threshold
The R1 Extender sends RTS (Request to Send) frames to certain receiving station and negotiates
the sending of a data frame. After receiving an RTS, that STA responds with a CTS (Clear to Send)
frame to acknowledge the right to start transmission. The setting range is 0 to 2346 in byte.
Fragmentation Length
Chapter 4 Advanced Settings Page 34
