Hardware Installation
Assemble the Mounting Bracket
1.
Place the main bracket into the seating and use a spanner to fasten the bracket to the R1
Extender with M5×16 screws
⑧
and M5 washers
⑨
provided in the hardware packets;
Figure 4 Bracket Mounting – Step 1
2.
Assemble the main bracket by placing articulation pole
②
to the T-form bracket
①
via a
M8×90
④
screw through the insertion axe and fix with the M8 washer
⑤
, spring washer
⑥
and M8 nut
⑦
;
Figure 5 Bracket Mounting – Step 2
Pole Mounting
1.
Install the main bracket and the pole mount bar
③
over the top of the pole by securing the drill
holes of the pole mount bar to the main bracket ones and insert two M8×80
④
screws, spring
washers
⑥
and washers
⑤
through the drill holes and main bracket;
Chapter 2 Hardware Installation Page 18
