Z-CAM ZOLAR Vega 30C, Руководство пользователя

Страница: 31 / 45

Status
Red
Green
Blue
Yellow
Magenta
Cyan
White
Wrong
Normal
ArtNet / sACN in use
Warning
：
Voltage / Temperature
ZolarLink Mode
：
Master is connected
ZolarLink Mode
：
Slave is connected
DMX Input / Output
-
-
-
Firmware upgrade in progress
ZolarLink Mode
：
Master disconnected
ZolarLink Mode
：
Slave disconnected
-
Long bright
Flash ( 0.5 second interval ）
5. ZolarLink Signal Check
If there is a significant delay in slave synchronization when the master changes settings, please
refer to the following steps:
a) Press the Menu Button [28] on the Main Unit Controller [16] of the master to enter the menu
list, rotate Rotary Encoder [26], select "ZolarLink", press it to enter the "ZolarLink" menu,
rotate Rotary Encoder [26] to select "Status", click to enter "ZolarLink Device List", and display
all connected slave IDs and their connection signal strength;
b) Press the Menu Button [28] on the Main Unit Controller [16] of the slave to enter the menu list,
rotate Rotary Encoder [26], select "ZolarLink", press it to enter the "ZolarLink" menu, rotate
Rotary Encoder [26] to select "Signal", display the signal strength between the current location
and the master. If the strength is showed as "Weak", please adjust the distance between the
slave and the master until the strength is showed as "Normal" or "Good".
6 . Exit ZolarLink
When the master and slave are in the power-o state, turn the M-I-S Selector [16] to select the "I"
position, and turn on the power. The indicator [21] turns a steady green, indicating that the main
unit has returned to the idle state.
7 . Exception Handling
If the slave fails to pair with the master unit, please refer to the following steps:
a) Please ensure that the distance between the master and the slave is within 3 meters;
b) During the pairing process, try to stop the operation and change the product settings in the
same network;
c) Make sure that in the "ZolarLink" menu, the "Bluetooth", "Light Control" and "Sync" settings
are all in the "On" state;
d) Restart the master and slave;
e) If it still fails to pair with the master after more than 20 seconds, reset the ZolarLink network,
press the Menu Button [28] on the master ‘s Main Unit Controller [16] to enter the menu list,
rotate Rotary Encoder [26], select " ZolarLink” , click to enter the “ZolarLink” menu, rotate
Rotary Encoder [26] to select “Reset Network” , rotate Rotary Encoder [26] to select “Yes” ,
the master will automatically restart and disconnect all slaves;
f) Press the Menu Button [28] on the slave’ s Main Unit Controller [16] to enter the menu list,
rotate Rotary Encoder [26] to select “ZolarLink” , press it to enter the “ZolarLink” menu,
rotate Rotary Encoder [26] to select "Reset Network" , and select "Yes", the slave will auto-
matically restart, disconnect from the host, and search for a connectable host for pairing.
Indicator Status
[ 25 ]
31
Version 1.0.0
Copyright © 2022 Shenzhen ImagineVision Technology Ltd. All Rights Reserved
ZOLAR™ Vega 30C User Manual