background image

48ZB 

Z

-

BEAST

 

 

Z

-

BEAST  

Finish Mower 

Rev:  March 2011 

Operation Safety Precautions 

Equipment Operation—Safety Precautions 

1.  Do not operate the engine in a confined space 

where dangerous carbon monoxide fumes can 
collect. Carbon monoxide is odorless, 
tasteless, and can be fatal. 

2.  Mow only in daylight or under good lighting 

conditions. 

3.  Make sure the mower is in neutral, parking 

brake is engaged, blades are disengaged, seat 
belt on, roll bar is raised and the operator is 
sitting in the proper position before attempting 
to start the engine. 

4.  Never operate on wet grass. 
5.  Watch for pedestrian or vehicular traffic when 

moving the mower while not in use (i.e., 
loading, unloading or transporting). 

6.  Never operate the mower with defective 

guards or shields, or without the safety devices 
securely mounted in place and functioning 
properly. 

7.  Be aware of discharge and never direct 

discharge of material toward bystanders nor 
allow anyone, especially children, near the 
mower during operation. 

8.  Do not change the governor settings or over 

speed the engine. 

9.  Always stop the engine when you leave the 

mower, even for a moment. 

10.  To help reduce fire hazard, keep the engine 

and the area around the engine free of grass, 
leaves or any other type of foreign material. 

11.  Beware of cutting edges. For safety always 

wear gloves when performing blade 
maintenance activities. Beware on multiple 
blade units since the rotation of one blade may 
cause the rotation of the other blade. 
 

 

12.  Do not operate the mower with the grass chute 

deflector in the raised position. Serious injury 
could occur. 

13.  If lightning is seen or thunder is heard in the 

operators vicinity, do not operate machine.  
Instead find shelter, as lightning may cause 
injury/death. 

14.  Never raise the mower deck while the blades 

are running. 

15.  Stop on a level ground, disengage drive, 

engage parking brake, and shut off engine 
before leaving operator’s position for any 
reason including clearing grass catcher or 
unclogging the chute. 

16.  Stop the mower immediately and inspect blades 

after striking objects or if an abnormal vibration 
occurs and discontinue use until repaired. 

17.  Keep hands and feet away from cutting unit.  

This product is capable of amputating hands 
and feet and throwing objects. 

18.  Be alert and slow down when making turns.  

Also look left, right, and behind before changing 
directions and reversing to be sure there is a 
clear path. 

19.  Disengage blades, slow down, and drive 

cautiously when crossing roads and side walks. 

20.  Never operate mower under the influence of 

alcohol and drugs. 

21.  Use care when loading or unloading the 

machine into a trailer or truck. 

22.  Use care when approaching blind corners, 

shrubs, trees, or other objects that may 
obstruct vision. 

23.  Always disengage blades when not in use. 
24.  Never listen to music with headphones/

earphones while operating the mower. 

Содержание FINISH MOWER 48ZB




























Отзывы: