14
48ZB
Z
-
BEAST
Z
-
BEAST
Finish Mower
Rev: March 2011
Item Procedure
Time Interval
Break-in
(first 5 hrs)
Every 8 hrs
(daily)
Every 40 hrs
(weekly)
Every 100 hrs
(Bi-weekly)
Every 200 hrs
(monthly)
Belts
Inspect (adjust if
needed)
X
X
Blades
Inspect and/or
Sharpen
X
Engine Air Filter
Inspect (see Engine
Owner’s Manual)
Engine Cooling Areas
Clean (see Engine
Owner’s Manual)
Engine Oil
Check (see Engine
Owner’s Manual)
Change (see Engine
Owner’s Manual)
Engine Oil Filter
Change (see Engine
Owner’s Manual)
Engine Spark Plug
Inspect (see Engine
Owner’s Manual)
Fuel Filter
Replace
X
Fuel Line
Check
X
Grease Fittings
Refer to page 19
Hardware
Check for proper
tightness
X X
Mower Main Frame
Remove debris from
under belt cover
X
Safety Interlock System
Check Operations
and Switches
X
Tires Check
Air
Pressure
X
Spindle/Blade Brakes
X
Cleaning the Mower
It is recommended that the Z-BEAST lawn mower be cleaned on a daily basis. Excessive accumulation of dirt,
debris, oil, etc. on cutting units, drives, mufflers, and engine may present a potential safety hazard.
Maintenance Schedule
