
15
54ZB, 62ZB
Z
-
Beast
Finish Mower
Rev: AUG2014
Z
-
BEAST
Disengaging Hydraulic Drive Units
Before physically moving the mower when the engine is NOT running, the hydraulic drive units need to be disengaged
into free-wheel mode.
To disengage the hydraulic drive units:
1. Stand at the rear of the mower and locate the hydraulic drive disengagement mechanism.
2. Pull the disengagement mechanism outward toward the rear of the mower until the thickened section of the rod is
outside of the access panel. (Note this may take a large amount of force as the springs inside are very stiff)
3. Slide the disengagement mechanism to the right so that the thickened section of the rod is captured in the narrow
end of the slot. In the lower picture the disengagement mechanism is shown in the disengaged position.
4. To reengage the hydraulic drive units, pull the disengagement mechanism out, slide it to the left, and release. Make
sure the thickened section of the rod passes back through the wide end of the slot.
Operating Instructions