background image

12

Remap section for full locker control 

•  Cooldown Mode:

 With the ignition on but 

engine not running, press the right arrow 
and cruise cancel button at the same 
time to turn the engine fan on High. They 
will also turn off automatically if the 
battery voltage drops below 11V.

•  Winch Mode:

 With the engine running, 

press the left arrow and cruise RES 
buttons at the same time. The engine will 
rise to the RPM selected in the live menu 
(default 2000). There may be a few 
seconds delay before it changes. It will 
NOT raise if you touch the accelerator 
pedal, and will cancel if you do. 

•  Hood Alarm:

 Arm the factory Vehicle 

Theft Alarm. If the hood is opened while 
armed, the alarm will sound and the 
Tazer JL Light show will be invoked. To 
turn off, press the PANIC button on the 
keyfob to turn off the alarm, and the 
LOCK button to turn off the light show. 
Set Panic needs to remain enabled for 
this feature to function.

•  Line Lock:

 While in 2WD, press and 

hold the left arrow and cruise set(+) 
buttons. Continue to hold and pump the 

brakes twice, firmly. The Jeep will stay 

held using only the front brakes while 
you press on the accelerator to do a 

burnout. “LineLock” will be displayed in 
the cluster.

•  Rock Crawl (patent pending):

 Press and 

hold the left arrow and cruise      set(-
) button, and pump the brakes twice. 
The Jeep will hold using all four brakes 
while you can work the pedals to apply 
torque, and release the buttons when 
you’re ready to move. “RockCrawl” will 
be displayed in the cluster.

•  Full traction control disable:

 Press and 

hold the traction button for 5 seconds to 

fully disable TC and  ABS. Shut off and 

re-start Jeep to re-enable.

•  Force Backup camera:

 Double tap 

the “mute” button to switch to backup 
camera (8.4” and 7” only) 

•  Button Remap:

 This function allows 

the assignment of “hotkeys” for quick 
access to some of the Tazer’s functions. 
The /-/RES may be used for 
this function. While the dash is in Audio 
mode, press and hold the RIGHT arrow 
and press the button you’d like to remap. 
The choices are: 

Any of the 8 light shows
backup cameras
Line Lock
Rock Crawl
TC Kill

Содержание Tazer JL Mini















Отзывы: