YZAKI 5.7M3/H AVEC TIMER, Руководство пользователя

Страница: 4 / 36

WARNING
IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW
ALL SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
When installing and using this electrical equipment, basic safety
precautions should always be followed, including the following:
• The pump is to be supplied by an isolating transformer or
supplied through a residual current device (RCD) having a rated
residual operating current not exceeding 30 mA.
• The power source on the wall of building should keep more than
4m away from pool.
• The appliance must be supplied by earthed power source.
•
RISK OF ELECTRIC SHOCK
- The pump cannot be using while
people are inside the pool. Forbid the access of the pool in case
of damage of the sand filter.
•
DO NOT BURY CORD.
Locate cord to minimize abuse from
lawn mowers, hedge trimmers, and other equipment.
• To reduce the risk of electric shock, replace damaged cord
immediately.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Extension cords can’t be used.
• Risk of electric shock. Using the sand filter with an unmatched
electrical supply is dangerous and will permanently damage the
sand filter.
• Do not remove the grounding prong or modify the plug in
anyway. Do not use adaptor plugs. Consult a qualified electrician
for any questions relating to validity of your plugs or grounding.
• Handle the sand filter with care. Do not pull or carry the sand
filter by the power cord. Never pull a plug from the outlet by
yanking the power cord. Keep cord free from abrasions. Sharp
objects, oil, moving parts, and heat should never be exposed to
the sand filter.
• Always unplug this product from the electrical outlet before removing,
cleaning, servicing or making any adjustment to the product.
• Don’t plug or unplug the appliance if hand is wet.
• Always unplug the appliance:
• On raining days
• Before cleaning or other maintenance
• Leave it unattended on holidays
• When the appliance will be not used for long time, such as in the
winter, the pool set should be disassembled and stored indoor.
•
CAUTION:
Read the instruction before using the appliance and
installation/reassembly every time.
• Safekeeping the instruction. For reconstruction the pool set every
time, please always refer to the instructions.
• If instruction is missed, please contact with Bestway or search it
in website: www.bestwaycorp.com
• Electric installations should follow national wiring rules. Consult a
qualified electrician for any questions.
CAUTION:
This sand filter is for use with storable pools only. Do
not use with permanently-installed pools. A storable pool is
constructed so that it is capable of being readily disassembled for
storage and reassembled to its original integrity. A permanently-installed
pool is constructed in or on the ground or in a building such that it
cannot be readily disassembled for storage.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Cleaning and user maintenance must be performed by an adult
above 18 years old who is familiar with the risk of electric shock.
NOTES:
• Place the sand filter on solid, level ground. Ensure the sand filter
is at least 2 meters away from poolside. Keep distance as far as
possible.
• Pay attention to position pool and sand filter so adequate
ventilation, drainage, and access for maintenance is available.
Never place the sand filter in an area that may accumulate water,
or on a walking path with lots of foot traffic.
• It is necessary to have the plug accessible after installation of the
pool. The plug of the sand filter shall be at least 3.5m away from
the pool.
• Atmospheric conditions may affect the performance and life span
of the sand filter; take adequate precautions to protect the sand
filter from unnecessary wear and tear that may occur during
periods of cold or hot weather and/or exposure to sun.
• Please examine and verify all sand filter components are present
before use. Notify Bestway at the customer service address listed
on this manual for any damaged or missing parts at the time of
purchase.
• It is imperative to change as soon as possible all deteriorated
parts. Only use parts approved by the manufacturer.
• Do not allow children or adults to lean or sit on the apparatus.
• Do not add chemicals to the sand filter.
• When chemical products are used to clean the pool water, it is
recommended to respect a minimum filtration time to preserve
the health of swimmers which depends on compliance of health
regulation.
• Only the media provided or specified by the manufacturer is to
4
be used with product installation.
• It is essential to check that the suction openings are not obstructed.
• It is advisable to stop the filtration during maintenance operations
on the filtration system.
• Regularly monitor the filter clogging level.
• A weekly check is recommended for backwashing or cleaning.
Minimum daily filtration operating time of 8 hours is recommended
to ensure clear pool water.
• It is essential to change any damaged element or set of elements
as soon as possible. Use only parts approved by person responsible
for placing the product on the market.
• All filters and filter media shall be inspected regularly to ensure
that there is not a build-up of detritus thus preventing good
filtration. The disposal of any used filter media should also be in
accordance with applicable regulations/legislation.
• Mind all the safety requirements and recommendations described
in the manual. In case of doubt on the pump or any circulation
devices, contact a qualified installer, or the manufacturer/importer/
distributor. The water circulation installation shall comply with the
European as well as national/local regulations, especially when
dealing with electrical issues. Any change of valve position,
pump size, grille size can cause a change of the flow and the
suction velocity can be increased.
• This product is not intended for commercial use.
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY
AND KEEP IT FOR FUTURE REFERENCE.
SAVE THESE INSTRUCTIONS