Yuxin YWH10, Руководство пользователя

Страница: 32 / 35

YWH10 IP Phone User manual
Zhengzhou Yuneng Communication Co.,Ltd Page 31 of 34
restarts successfully, the new configuration is effective.
Note After entering set page, if Update button is not clicked within 5 seconds, then when
you click it again, the index page asking for pin will pop up again. Then please input
the password again to enter the set page and then click
Update button to confirm the
modification.
3,Configured by PalmTool
PalmTool is a tool designed especially to configure and upgrade the YWH10 IP phone.
You can visit http://www.yntx.com to download the latest version of PalmTool. Then
please unzipthe downloaded file and save them.
a) On a PC connecting with the phone or at the same segment of the phone, double
click icon to open the PalmTool. The index page of PalmTool popup.
b) Input the IP address of the phone into Local IP field (such as 192.168.1.100), and
then click “Phone Settings” button.
From Version1.24, use PalmTool to set the IP phone, please set debug as output or output
all firstly, or PalmTool cannot connect IP phone. The parameters of PalmTool is same as the
parameters in HTTP, so please refer to HTTP set chapter to learn how to set IP phone.
Usage of the phone
1, Receiving calls
YWH10A/B/C/D IP phone can receive incoming calls from other YWH10A/B/C/D IP
phone and devices that support the H.323 protocol. It works just like an ordinary phone for
incoming calls. When it rings, you can receive the call by following methods:
(1) Use handset
Lift the handset and begin speaking. When the call is over, put the handset back.
(2) Handset to hand free
While receiving call with handset, press 【 Hand free 】 on the keypad and then put down
the handset. When the call is over, press 【 Hand free 】 again.
(3) Use Hand free