Yuxin YWH10, Руководство пользователя

Страница: 28 / 35

YWH10 IP Phone User manual
Zhengzhou Yuneng Communication Co.,Ltd Page 27 of 34
Note To modify the parameters of backup settings, please use Telnet commands.
●
local prefix: With enable or switch selected in innerline dropdown list, please fill the
number switching to backup setting 1 here, such as 56.
●
nonlocal prefix: With enable or switch selected in innerline dropdown list, please fill the
number switching to backup setting 2 here, such as 57.
●
use digitmap: Enable/disable digitmap by checking/unchecking the box.
●
ring type: Set ring type by selecting corresponding item from drop down list.
dtmf 0-9: Set ring as ordinary rings in different frequency
not disturb: Set the phone do not ring by selecting this item.
pcmring: Set ring as music shipped from factory by selecting this item.
user define
：
Set ring as music saved by user by selecting this item.
●
answer: Enter a number from 0 through 60 to set the entries of the seconds before the phone
answer the call auto or forward the calls. To disable auto answer function, please set this
parameter as 0.
● predial time: Set time limit from picking up the speaker to dialing the first the number.
● interdial time: Set time limit between dialing two numbers.
● postdial time: Set time limit from dialing the last number to placing a call. If the next
number is not dialed within the post dial time limit, then the phone will call the dialed number
auto.
(4)Audio settings
Fig 11 Audio Setting Page
● audio type: Set audio type of the phone by selecting item from drop down list. The options
are g729 ， g7231 ， g711u ， g711a and auto. “auto” is suggested, since when “auto” is selected, IP
phone will negotiate with system about which algorithm to use and be able to communicate
with more terminals and systems.