Joystick
The joystick is mainly used to control the direction and speed of the
wheelchair. The direction the joystick is pushed is the same as the
direction of the wheelchair. The farther the joystick is pushed away
from the center, the faster the wheelchair will move. The wheelchair
will automatically brake when the joystick is released; when the
wheelchair is stationary, do not push the joystick violently. Hold the
joystick with your hand to move the electric wheelchair forwards and
backwards and make turns. The electric wheelchair will automatically
return and brake when the joystick is released.
Battery gauge
The battery gauge is the indicator of the battery capacity. When the
green LED lights are on, they indicate the battery capacity is full. When
yellow or red LED lights are on, they indicate the battery capacity is not
sufficient. Please charge the wheelchair as soon as possible to
ensure normal operation.
Speedometer
It displays the maximum speed setting of the wheelchair. 5 speed
settings are available: 1st gear: lowest; 5th gear: fastest.
Horn button
Press this button to sound the horn.
Acceleration button
Press this button to increase the speed setting. The gear increases by
1 each time you press this button and won't change after it reaches 5th
gear.
Deceleration button
Press this button to decrease the speed setting. The gear decreases
by 1 each time you press this button and won't change after it reaches
1st gear.
UDB interface
USB interface puts out 5V0.5A.
(2). Switching between electric driving and hand-pushing
When the wheelchair will be pushed manually instead of driven
electrically, move the left and right motor clutch or handle to the
"Manual" position; when driving electrically, switch the clutch or handle
into the "Electric" position.
(3). Charger
The power supply charger is provided free of charge (to be used
during the first test run). Customers are recommended to purchase
the battery charger proposed by the company: lead-acid battery
charger output DC24V3A and lithium battery charger output
DC24V2A or 3A, which cannot be used together. The charger shall
meet the requirements of GB9706.1-2007.
Note
While charging, turn on the power switch
on the battery box of the electric
wheelchair and turn off the controller
power button. Note: the power switch on
the battery box is turned off when
delivered. Make sure to turn on the power
switch while charging. The switch is
located on the back of the right battery
box: "I": ON and "O": OFF, see Figure 16.
Figure 16
10
11
Manual mode
Electric mode
Manual mode
Electric mode
