Shenzhen Yunlink Technology Co., Ltd
P6: System Status
3rd
：
Quickly Configure Wireless AP
①
Gateway Mode:
Click “Gateway Mode” and choose the right WAN access type, then input the right SSID, Channel, key as like.
②
WiFi Repeater and Station operation configuration
A. Login the Web management page, click “ Repeater Mode”, then “Scan AP”
B. Select the AP’s SSID want to bridge
C. input the AP’s key, and apply changes
D. In Repeater Mode, the SSID is disable in default setting, it work as Station; Then if need SSID broadcast in this
operation mode, just manual to change under Advanced Settings, So, click sure in this part to finish the repeater
operation mode setting.
E. After this step, can click the Device status to check the status of this Wireless AP. And it will show Wireless AP’s LAN
Interface, WLAN status and Sigbal Strength.
F. Then if SSID should be broadcast under repeater mode, pls click “Advanced Settings” , then “2.4GHz Repeater” will
pop up.
If want to bridge another AP’s SSID, then can setup in this part and Apply changes.
