YUNEEC H600, Быстрый старт, Страница: 5 / 25

5
Battery Charging
Charge the Drone Battery
Battery Maintenance Guide
Charge the T-One Battery
Power the Charger from a
100-240V AC outlet. Then
press the power button to
switch on the charger.
Plug the aircraft battery into
the charger port as illustrated.
Then the battery will be char-
ged automatically.
Charge the T-One battery by using the Type C USB cable.
Insert the connector into the Type C USB charging port as the
picture shown.
The battery should be charged and discharged at least once eve-
ry 3 months. Fully charged then discharged to the drone forced
landing voltage, and then recharged to 50% capacity.
Warning:
The cut-off voltage of the battery is 3.0V for each cell (18.0V
total) please do not over discharge lower than this voltage.
Notice:
The batteries are a consumable material and that they have to be
replaced after they show weakness.
Notice:
Plug out the battery from the charger after the charging finished
to prevent possible over discharged is suggested.