YUNEEC H600, Быстрый старт, Страница: 17 / 25

17
Re-Bind
The drone and T-One Transmitter are already bound before
being shipped from the factory. It is unnecessary to bind
them again. The operator can follow the steps below if rebin-
ding is needed.
Step 1:
Power on the H600 Drone. Wait a few seconds for all systems to
be boot up.
Step 2:
After initialization completes, use a paperclip or similar item to
push the Binding Button inside the hole as the picture shows.
Release the button when the blue LED blinks quickly.
Step 3: Power on the T-One Transmitter and tap the “USYNC”
Button to bind.
Step 4: Tap the “Next” Button to start the binding process.
Next
Next
Press
LED Blink Blue