14
Do not carry out the installation yourself. RISK OF ELECTRIC SHOCK!
I
NSTRUCTIONS FOR THE INSTALLER
(
QUALIFIED PROFESSIONAL
):
1.
Your household power supply must meet the power consumption of the appliance.
2.
The voltage must meet the values on the nameplate.
3.
The power cord must withstand the values on the nameplate.
4.
When connecting do not use adapters, reducers and branching devices as they
cause overheating. RISK OF FIRE!
5.
The power cord must not touch hot areas and its temperature must not exceed 75
0
C.
6.
When the socket is not accessible for the user
or a fixed electrical connection of the
appliance is required
, an all-pole disconnecting device must be incorporated during
installation. Disconnecting devices are switches with a contact opening distance of
at least 3 mm. These include LS-switches, fuses and protectors (EN 60335). Read the
information on the nameplate and the connection diagram before connecting the
appliance to the mains. The electricity supply must be performed via a 16A automatic
cut-out. If in doubt, always contact the local building authorities and consult the
relevant legal provisions.
7.
Do not bend or compress the power cord.
8.
Check the power cord regularly. The power cord must be replaced by a qualified
professional
only
!
3.
Operation
3.1 Hob and control panel
Read the complete instruction manual before you operate the appliance for the first
time. Strictly observe the safety instructions!
Remove the complete protective film!
3.1.1 Hob
