11
A (mm)
B (mm)
C (mm)
D
E
Wall Cupboard
mind. 450 mm
Extractor hood
mind. 650 mm
min. 50
min. 20
Air inlet
Air outlet 5 mm
The top closing edge of the cabinet (
1
) must not be flush with the installation opening
(
2
). Install the closing edge in offset positioning (
1
) or bevel the closing edge (
3
).
X
Y
min. 150 mm
min. 20 mm
I
NSTALLATION OF THE HOB
:
1.
Before installing the hob to the worktop, the adhesive seal has to be fixed on the
bot-
tom
edge of the hob properly.
The seal has to be fixed properly. The outer side of the seal must match the bottom
outer edge of the hob (s. fig. below). The seal
must be
fitted tightly on the bottom
edge of the hob (no overlaps, no gaps etc.) to prevent liquids etc. from entering the
installation opening subsequently.
