Shenzhen Yunmi Intelligent Technology Co., Ltd
7
9: Lights
9.1
：
10 inch scooter is high-light DB headlight; 11 inch scooter is dual angel eyes hea high-light DB headlight.
9.2
：
Tailight
When scooter start and brake, taillight will light.
BASIC OPERATION
1. Power on/off
Long press power button
for 3 seconds, instrument will be light, which means power on. Power will be
automatically off without any operation for ten minutes. Press accelerator, user can control the speed between 1~25
km/h.
2. Power display
The number of grids shows the remaining battery power.
Attention: while power shows 0 grid, scooter must be charged immediately. Do not let grip disappear totally, which is
easy to damage the battery.
It is suggested to charge if there is only one grid power.
3.
Riding Operation
Ready to start
3.1. Choose a wide and flat place.
3.2. Unfold the scooter.
3.3. Adjust the height of T-bar
3.4. Ensure all safety clamp closed tightly.
3.5 Press power button.
3.6 One is on scooter, and the other is on the ground.
3.7 The scooter will begin to move by triggering speed switch. Put two feet on pedal at the same time. The bigger the
angle of speed switch, the faster scooter moves.
4. Stop Scooter
Grip the brakes, power for motor will be cut down immediately and scooter will be slowed down. Then put one foot on
the ground.
USAGE AND MAINTENANCE
1. Battery and charger
The scooter is equipped with dedicated Lithium battery and intelligent charge. Do not use other brand’s charger.
Other battery is also not suitable for this charger. You can charge it at any time to ensure power full, which does not
damage the battery. The power will be changed based on difference of temperature, terrain, battery itself and weight
of user.
