Yulong D200, Руководство пользователя, Страница: 7 / 13

10
11
12
14
13
Unbalanced analogue audio output
Balanced analogue audio output. It has an extremely low output impedance, and you can use it as a balanced headphone
amplifier. Volume control must be turned on for such application, otherwise the headphone and your hearing may be
permanently damaged. We don't response for such damage.
!!!
Warning: Do not use regular XLR-RCA conversion adapters or cables , which normally short pin 3 to ground. You
will damage the output stage!!! We don't response for such damage. Make sure pin 3 is disconnected if you want to
use the balanced output as unbalanced.
Spdif coaxial digital input
Spdif toslink input
Tips: Some quality equipments have a poor digital signal quality, and might cause malfunctioning under higher
bitrates.
AES/EBU digital input
USB input. You must install driver for Windows system, and please download from http://yulongaudio.com/en/down.asp .
You must make sure the playback software can self adopt digital file sample rate. ASIO and WASAPI is preferred. Play back
software must support DSD mode doe DSD and SACD playback. When valid DSD signal is detected, the LCD will display
input USB DSD.
.
Voltage selection.
! !!
Warning: Please make sure you choose correct voltage before connecting to mains power. Otherwise you may
permanently damage D200 and your equipment. We don't response for such damage.
Mains power socket, power switch and fuse box. We include a back up fuse in the fuse cpmpartment.
ASIO device name is: XMOS USB Audio
9
14
7
8
D200 210*140mm P14