IR illuminator do not turn
off via the selector switch
on the scope.
remote
control.
illuminator using the remote
control.
The aiming point shifts
after firing rounds.
The riflescope is not mounted
securely.
Check how securely the riflescope
has been mounted and make
sure that the same type and caliber
bullets are being used as when
the scope was initially sighted in; if
your scope was sighted in during
the summer, and is now being
used in the winter (or the other
way
around), a small displacement of
the aiming point is possible.
The riflescope does not focus.
Wrong settings.
Adjust the riflescope according to
the instructions given in
the section, entitled
“OPERATING THE
PHANTOM” and check the
surfaces of the eyepiece and
objective lenses and clean them if
necessary from dust,
condensation, frost, etc; to
prevent fogging in cold weather,
apply a special anti-fog solution.
