34
60ton Petrol & Diesel Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual
Start engine
Loading log
Operator position
Hand activate
Vertical position loading
Second person
Extend wedge
Please read the engine owner’s manual for how to start your engine.
Make sure the hydraulic oil is above -12 degrees before starting the engine. Cold
hydraulic oil can damage the hydraulic pump.
If outdoor air temperature is below 0 degrees, allow log splitter to warm up by
extending and returning the wedge several times before splitting wood.
Load log onto beam with a cut end against the end plate - positioned for a
lengthwise cut.
The log splitter is designed only for cutting lengthwise with the grain,
NOT
for
cutting across the grain.
Hold bark side. Hold the bark side of logs when loading or positioning, never the
ends. Never place your hands or any part of your body between a log and any part
of the log splitter.
ALWAYS
operate the log splitter from the manufacturer’s indicated
OPERATOR POSITION
Other positions are unsafe because they can increase the risk of injury from
crushing, cutting, flying objects, or burns.
Use only your hand to operate the Split Control Lever Never use any other body
part, or a rope, cable, or other remote device to actuate the control.
Place the log on the endplate and turn it until it leans against the beam and is
stable. If the log is too big or oddly shaped, stabilize the log with wooden shims
between the log and endplate or ground.
DO NOT
use your leg or knee to
stabilize the log.
NEVER
stabilize the log by placing your hand on lop of the log.
If loading a heavy log a 2nd person may be required to help load the log only.
Many accidents occur when there is more than one person involved in loading
and operating the log splitter. Only one person should operate the controls.
If a second person is assisting in loading logs, the operator must
NEVER
actuate
the S/?lit Control Lever until the assistant and all bystanders are at least 10 feet
away.
NEVER
allow an assistant to hold the log in place while the operator actuates the
Split Control Lever
Move Split Control Lever toward end plate to extend wedge and split log.
Step 3
Step 4
Step 5
Step 6
Yukon
Содержание HL56000D
Страница 43: ...Y u k o n ...