PCM clock
2048kHz
PCM Frame synchronization signal
Short frame
Data format
MSB
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.
FCC Label Instructions
The outside of final products that contains this module device must display a label referring to the enclosed
module. This exterior label can use wording such as: “Contains Transmitter Module
FCC ID:2AN95-CLM920" or “Contains FCC ID:2AN95-CLM920” Any similar wording that expresses the
same meaning may be used.
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed
applications only. Antenna gain including cable loss must not exceed
5.41
dBi
in
GSM850
,11.41dBi in
EGPRS850, 2.5dBi in GSM1900, 8.0dBi in EGPRS1900, 10.4
3
dBi in
WCDMA Band
V
,
10.5
dBi
WCDMA
Band
II
,
11
.0
dBi in LTE Band 2, 7
.0
dBi in
LTE Band 4
,
11.4
2
dBi in LTE Band 5
,10.50dBi in LTE Band 7
for the purpose of satisfying the requirements of
CFR 47
2.1043
&
2.1091. The antenna(s) used for this
transmitter must be installed
to provide a separation distance of at least 20
cm from all persons and must
not be co-located or operated
in conjunction with any antenna or transmitter
, except in accordance with
FCC multi-transmitter evaluation
procedure.
Compliance of this device in all final product configurations is
the responsibility of the Grantee. Installation of this device into specific final products may require the
submission of a Class II permissive
change application containing data pertinent to RF Exposure,
spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
Содержание CLM920
Страница 1: ...CLM920 Hardware user guide ...
