10
11
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations
flicker emissions
IEC 61000-3-3
Compliance
Group 1
Group B
Not
applicable
Not
applicable
Electromagnetic environment - guidance
The W203 blood pressure monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of W203 blood
pressure monitor should assure that it is used in such an environment.
The W203 blood pressure monitor uses RF
energy only for its internal function. There
for, its RF emissions are very low and are
not likely to cause any interference in
nearby electronic equipment.
The W203 blood pressure monitor
suitable for use in all establishments,
including domestic establishments and
those directly connected to
the public low-voltage power supply
network that supplies
buildings used for domestic purposes.
Guidance and manufacturer's declaration – electromagnetic
immunity – for all EQUIPMENT and SYSTEMS
Guidance and manufacturer´s declaration – electromagnetic emission
Guidance and manufacturer´s declaration – electromagnetic
emission – for all EQUIPMENT AND SYSTEMS
5.4.4
5.4.5
EN 15986
Clause 4.2
-
WEEE Directive
2012/19/EC
Annex IX
IEC 60601-1
Table D.1, 20
Caution, indicating that the user should consult the instructions
for important warnings, precautions or contraindications
Contains or presence of natural rubber latex, indicating that the
device is made with natural rubber latex
Not made with phthalate plasticizer di(2-ethylhexyl Phthalate
(DEHP)
Indicates separate collection for waste of electrical and electro
nic equipment (WEEE).
Type BF Applied Part
Follow instructions for use
IEC 60601-1
Table D.2, 10
-
Not made with natural rubber latex
Federal USA. law restricts this device to sale or use by or on the order of a
physician or proper ly licensed practitioner.
PHT
DEHP
Rx Only
Case quantity/ pouch quantity
