6
Component Compatibility
Motherboard
The Mobius can accommodate all Mini-ITX or DTX motherboards. Any other formats cannot be mounted to this
chassis.
CPU Cooler
This chassis is intended to support all-in-one CPU coolers, or a fully custom loop, with 240mm radiators. That said,
you may also install an air cooler of any size, as long as it can fit on M-ITX motherboards.
RAM
There are no limitations on RAM size, but if you use a large air cooler, you may want to use a low-profile RAM.
PSU
Only SFX or SFX-L PSUs will fit in the hole pattern.
Full size ATX PSUs cannot be mounted to this chassis.
We recommend only using fully modular PSUs, as custom cables are required to make a clean build on this chassis.
GPU
We recommend using 2-slot GPUs, but most 2.5 and 3 slot cards will fit on the chassis. The maximum GPU length
depends on what you have installed on the inside of the 240mm hole pattern on the right. Please see clearance
measurements below:
- No Fan/Radiator: 333mm / 13.1”
- 25mm fan: 308mm / 12.1”
- 29.5mm Ra 25mm fan: 278mm / 10.9”
Power Button Mounting Holes
The Mobius ships with an included 16mm button and power wire. There is a 16mm through-hole on the front plate
and a 3/4” hole on the main chassis. As of the first production iteration, if you do not want to use a front plate, you
will need a 3/4” button for the hole on the chassis.
Pumps & Reservoirs
Using a 120mm bracket, you can easily mount a small pump or reservoir over the rear 120mm hole pattern, or
on top of a fan mounted to the 240mm hole pattern. We found the EK Quantum Kinetic FLT120 to be an excellent
solution for a custom loop.
Power Cables
This case was designed to be used with custom sleeved PSU cables. In our production prototypes, we successfully
used the lengths listed below, though we highly recommended taking careful measurements with your own
components installed on the case. The backplate has plenty of room for cable management clips to properly arrange
the runs in an organized way. Feel free to cut, crimp, and sleeve your own cables or buy professionally made cables
and accessories from a company such as Mainframe Customs or CableMod.
- 24 Pin:
23”
- EPS:
28”
- PCI:
12”
- Sata/ Molex:
15”
