Yuchai YC135, Руководство по эксплуатации и обслуживанию

Страница: 117 / 183

117
15.2 PRECAUTION FOR JUMP-START CABLES DISCONNECTING
After the engine has starter, disconnect the jump-start cables in the reverse
order in which they were connected:
1. disconnect one clip of jump-start cable (4) to the engine block of the
problem machine,
2. disconnect one clip of jump-start cable (3) to the negative terminal (-) of
the problem machine,
3. disconnect one clip of jump-start cable (2) to the positive terminal (+) of the
normal machine,
4. disconnect one clip of jump-start cable (1) to the positive terminal (+) of the
problem machine.
15.3 PRECAUTION FOR BATTERY CHARGING WHILE IT IS
ONBOARD
B
ATTERY CHARGING
•
Remove the cables from battery terminals, otherwise the
alternator can be damaged from extra voltage.
•
To allow gas produced while charging escape, take off
all top from battery.
•
If battery over heat (electrolyte exceed 45 °C) suspend
charging for a while.
•
Stop immediately charging when battery is well charged.
If you leave battery under charge too much it may
happen:
a) battery overheat,
b) electrolyte level drop down,
c) battery problem may come in.
•
When connect the battery make sure to connect the
cables correctly. Never mix the cable (+ with - ) it will
damage the electrical components and battery.