manualshive.com logo in svg

Yuba SPUCY CURRY, Руководство пользователя, Страница: 59 / 81

Поделиться
Скачать
Yuba SPUCY CURRY Скачать руководство пользователя страница 59

55

EBCC Technical and Customer Service: +1 800-377-4532

7.6. Cargo.indd

Last Modifi ed March 24, 2015 12:42 PM

Cargo

Additional cargo considerations

Using good judgment

No warning is a substitute for good 

judgment. Always use good judgment. If 

you have reason to suspect that your own 

judgment isn’t great, share your plans 
with somebody you respect, and ask for 
a second opinion.

Additional cargo 

considerations

Always make sure you have at least 

two well-adjusted brakes. Under severe 
loads (as when carrying a passenger or 

cargo) at high speed a very strong front 

brake can lead to failure of the front fork

To reduce the risk of injury, use wheel-

skirts when carrying passengers or chil-
dren.

Pre-ride checklist

 

Ensure straps cannot get caught in the 

wheels.

 

Ensure bags, boxes or any other item 

are in a position where they cannot be 
caught in the spoke.

 

Double-check your load for security and 

stability.

 

Check that your brakes are well adjusted

 

Check to see that your wheels are 

securely fastened

 

That your helmet is securely fastened.

 

That no components or frame members 

are cracked or broken (in general, if at 

any time you notice a crack or bend in 

your bike, stem, forks, or bars of your 

bicycle, stop riding immediately; take 

your rig to your local bike shop and have 

them inspect it)

 

That your bike is equipped with the 

proper passengers accessories (child-
seat, foot pegs, handle bar, wheelskirts).

Kickstand

A bicycle kickstand is provided with each 

bicycle. There are a few important points 
to take into consideration when using a 
kickstand with a cargo bicycle.

 

Kickstands are not designed for heavy 

loading or passenger loading. 

 

The user should always hold on to the 

bike when loading it. Or the user can 
lean the bike against a wall or a pole 
to prevent the bicycle from falling over.

Maximum payloads

 

For the carrier: 135kg | 300lbs

 

Behind axle: 20kg | 44lbs

 

Sideloaders: 30kg | 65lbs (each side)

 

Kickstand: 50kg | 110lbs

Sideloader add-ons

 

The integrated open end tubes found 

on the upper and lower sections of the 
carrier are enclosures for Yuba specifi c 

Sideloader add-ons. 

 

These add-ons can be used  as a hor-

izontal racks or platforms for carrying 
wide or big boxes. They are essentials 
to carry long objects.

 

They can also be used for passenger’s 

feet support. 

Содержание SPUCY CURRY


















































































Отзывы:

Нет отзывов