background image

10

Safety

Off-road safety

entangled in the moving parts of the 

bicycle.

 

Never hitch a ride by holding on to 

another vehicle.

 

Don’t do stunts, wheelies or jumps. If 

you intend to do stunts, wheelies, jumps 

or go racing with your bike despite our 
advice not to, read “Extreme, stunt or 
competition riding” on page 13 now. 

Think carefully about your skills before 

deciding to take the large risks that go 
with this kind of riding.

 

Don’t weave through traffi c or make any 

moves that may surprise people with 
whom you are sharing the road.

 

Observe and yield the right of way.

 

Never ride your bicycle while under the 

infl uence of alcohol or drugs.

 

If possible, avoid riding in bad weather, 

when visibility is obscured, at dawn, dusk 
or in the dark, or when extremely tired. 
Each of these conditions increases the 
risk of accident. 

 Off-road safety

We recommend that children not ride on 

rough terrain unless they are accompanied 
by an adult. 

 

The variable conditions and hazards 

of off-road riding require close atten-
tion and specifi c skills. Start slowly on 
easier terrain and build up your skills. If 

your bike has suspension, the increased 

speed you may develop also increases 

your risk of losing control and falling. Get 

to know how to handle your bike safely 
before trying increased speed or more 
diffi cult terrain. 

 

Wear safety gear appropriate to the kind 

of riding you plan to do.

 

Don’t ride alone in remote areas. Even 

when riding with others, make sure that 
someone knows where you’re going and 
when you expect to be back.

 

Always take along some kind of identifi -
cation, so that people know who you are 
in case of an accident; and take along 
some cash for food, a cool drink or an 

emergency phone call.

 

Yield right of way to pedestrians and 

animals. Ride in a way that does not 
frighten or endanger them, and give 
them enough room so that their unex-
pected moves don’t endanger you.

 

Signal with voice or bell when passing.

 

Don’t block the trail. Move your bike off 

to the side of the trail if you stop.

 

Walk your bike up and down access 

ramps.

 

Be prepared. If something goes wrong 

while you’re riding off-road, help may 
not be close.

 

Before you attempt to jump, do stunt 

riding or race with your bike, read and 
understand “Extreme, stunt or compe-
tition riding” on page 13.

Off-road respect

Obey the local laws regulating where and 

how you can ride off-road, and respect pri-

vate property. You may be sharing the trail 

with others — hikers, equestrians, other 
cyclists. Respect their rights. Stay on the 
designated trail. Don’t contribute to erosion 
by riding in mud or with unnecessary sliding. 
Don’t disturb the ecosystem by cutting your 

Содержание SPUCY CURRY


















































































Отзывы: