English
- 14 -
1.
Problem:
No LED l i t .
Possible Cause:
AC end is not making a good
connection.
Solution:
Check for poor connection at AC side.
2.
Problem:
Green LED k e e p s blinking.
Possible Cause:
Clamps are not making a good
connection.
Solution:
Check for poor connection at battery and
frame.
3.
Problem:
Red L E D i l l u m i n a t e d right away when
connecting
onto a battery.
Possible Cause:
a. Incorrect battery voltage.
b. Battery is at full charge capacity
Solution:
a. Verify that c h a r g e r selector switch is in
correct 6V or 12V position to match the
battery’s
voltage. The charger will give you
a warning if you are connecting to the incorrect
application.
b. The batter y is currentl y at full charge and
w ill continue in maintenance/float mode until
voltage drop occurs. At the time of voltage, drop,
charger will resume in maintenance, charging
mode
TROUBLESHOOTING
Содержание YUA2AMPCH
Страница 18: ...English...
Страница 52: ...Spanish...
