11
PUSH CART
Important:
Leave the latch lock clevis pin in place at all times while using the cart as a push cart.
1. To convert cart for push operation, remove the
Ø
10x95 long clevis pin and R Pin
Ø3
which secure the
tongue in the towing position. (See step 9 on page 9.) Pivot the front tongue into the storage position
underneath the rear tongue and secure it using the
Ø
10x95 long clevis pin and R Pin
Ø3
. (Refer to
Step 3 on page 6.)
2. For best handing and to help prevent accidental tipping, distribute the weight of the load evenly in the
cart.
3. Do not load more weight into the push cart than you can handle and control comfortably.
4. To dump material from the push cart, lift up on the handle and tilt the cart forward. Be sure that the latch
mechanism on the tongue is locked and secured with the clevis pin to prevent accidental release of the
latch.
MAINTENANCE
1. At the beginning of each season, using a light machine oil, lubricate the latch, the latch pivot bolt, and
the area of the axle where the draw bar tongue pivots.
2. Grease or oil the wheel bearings periodically. Use automotive wheel bearing type grease or 20 weight
oil.
3. Check periodically for loose bolts.
4. Keep tire adequately filled. Do not exceed the maximum recommended pressure on tire.
