10
！
！
OPERATION
CAUTION: TO AVOID POSSIBLE INJURY, BEFORE
RELEASING THE LATCH BE SURE THAT NO ONE
IS NEAR THE CART.
TOW CART
1. To convert the cart for towing, remove the plastic cap from the tongue. Remove the 10x95 clevis pin
and R Pin which secure the front tongue in storage position underneath the rear tongue. Pivot the front
tongue outward and secure it in the towing position using the same clevis pin and hairpin cotter. Push
the handle in all the way against the front of the tray depressing the detent buttons in the bottom of the
handle.
2. Refer to the vehicle owners manual for instructions on safe operation on slopes.
3. Always test to make sure your tractor has adequate towing and braking capabilities whenever hauling a
substantial amount of weight in your cart. Use extra caution when operating on slopes.
IMPORTANT!
Do Not Exceed 295KG. Weight Capacity Of Cart
One cubic foot of dirt weighs approximately 68KG.
CAUTION: VEHICLE BRAKING AND STABILITY MAY BE
AFFECTED WITH THE ADDITION OF AN ACCESSORY OR
AN ATTACHMENT. BE AWARE OF CHANGING
CONDITIONS ON SLOPES.
4. For best handing and traction, distribute the weight of the load evenly in the cart.
5. To dump material from the cart, remove the clevis pin
Ø
10x95 from the latch on the tongue and release
the latch. The cart bed will then tilt backwards to empty its contents. After emptying, pull the front of the
bed down toward the cart tongue until the latch snaps into place. Reinstall the clevis pin in the latch to
prevent accidental release of the latch.
6. The maximum towing speed for his cart is 10 m.p.h.
