Ytc YT-1200L, Руководство пользователя

Страница: 17 / 21

- Double Acting Actuator
For YT-1200 series double acting type, when inputting current signal, supply pressure
is our from OUT1 port. Please refer to <fig 16 & 17>
Adjustment
Adjustment – Cam
①
Direction of actuator's stem rotation must be checked when supply signal is supplied.
When actuator's stem rotates clockwise, the face of cam must be shown "DA." On the
other hand, when the stem rotates counter-clockwise, adjust cam so "RA" shows on the
face of cam.
②
Check whether actuator's angle is at the initial point.
③
After checking the initial point, release the hexagonal flange nut and adjust the position
of the bearing so it is at 0 point. <Figure 18>
④
When produced, the cam is set as RA.