Ytc YT-1200L, Руководство пользователя

Страница: 13 / 21

Bracket Information
YT-1200R is supplied with standard bracket. The bracket can be used for fork lever and
NAMUR bracket. Please see <fig 8> for more detailed information.
1. Standard actuator stem height (H) is 20, 30, or 50 mm. After check “H”, assemble with
the bracket as shown in <fig 8 & 9>
2. Attached bracketed YT-1200R to the actuator
by using hexagonal-headed and wrench bolts.
Size of the bracket hole is 6mm. When
tightening bolts, use spring washer or similar
for complete attachment to the actuator, so
YT-1200R will not be shaken by vibration or
any other impact. The direction of bracket is
different by the operating condition, but in
general, the positioned is installed as shown.
<fig 10>