YSI MultiLab 4010-1W, Быстрый старт

Страница: 5 / 52

MultiLab 4010(P)-1W English
5
ba76149y04 03/2018
EN
Initial
commissioning
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD and on
the Internet under www.YSI.com .
1 Status information
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control
(CMC function)
5 Sensor symbol
(calibration evaluation)
6 Measured temperature (with unit)
7 Softkeys and date/time
3
2
1
4
5
6
HOLD AR
7
AutoCal TEC
USB output
Info
01.07.2011
08:00
Display (example: pH measurement)
1 IDS sensors
(pH, conductivity, D.O.)
2 USB B interface (device)
3 ProOBOD
4 Connection for line adaptor
5 Service interface
1
3 4
5
2
Jack field /connections
1 Insert the supplied batteries.
Make sure that the poles are in the correct position.
2 Connect the power pack if necessary.
3 Switch on the meter with the <On/Off> key.