manualshive.com logo in svg

YSI 550 DO, Руководство по эксплуатации

Поделиться
Скачать
YSI 550 DO Скачать руководство пользователя страница 21

YSI Incorporated

YSI 550 DO Handheld Instrument

19

SECTION 7 WARRANTY AND REPAIR

The YSI 550 DO Instrument is warranted for three years from date of purchase by the end user
against defects in materials and workmanship. YSI 550 DO probes and cables are warranted for one
year from date of purchase by the end user against defects in material and workmanship. Within the
warranty period, YSI will repair or replace, at its sole discretion, free of charge, any product that
YSI determines to be covered by this warranty.

To exercise this warranty, write or call your local YSI representative, or contact YSI Customer
Service in Yellow Springs, Ohio. Send the product and proof of purchase, transportation prepaid, to
the Authorized Service Center selected by YSI. Repair or replacement will be made and the product
returned, transportation prepaid. Repaired or replaced products are warranted for the balance of the
original warranty period, or at least 90 days from date of repair or replacement.

Limitation of Warranty

This Warranty does not apply to any YSI product damage or failure caused by (i) failure to install,
operate or use the product in accordance with YSI’s written instructions, (ii) abuse or misuse of the
product, (iii) failure to maintain the product in accordance with YSI’s written instructions or
standard industry procedure, (iv) any improper repairs to the product, (v) use by you of defective or
improper components or parts in servicing or repairing the product, or (vi) modification of the
product in any way not expressly authorized by YSI.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.  YSI’s LIABILITY UNDER THIS WARRANTY IS LIMITED TO
REPAIR OR REPLACEMENT OF THE PRODUCT, AND THIS SHALL BE YOUR SOLE AND
EXCLUSIVE REMEDY FOR ANY DEFECTIVE PRODUCT COVERED BY THIS
WARRANTY.  IN NO EVENT SHALL YSI BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECTIVE
PRODUCT COVERED BY THIS WARRANTY.

Содержание 550 DO

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды