4
CONNECTING TO THE MAINS OUTLET
Your D/A Converter has a description of the appropriate operation voltage on its
back panel. Please make sure not to overlook the specifications. In case you need to
operate it in a region with no complying voltage, contact your dealer or the factory.
The power cable that you will use must be at least 3 x 1.5 square mm and grounded to
the mains outlet.
The on/off switch for the
DAC-100
is located on the back panel.
This device is
Class I
and the following safety rules apply:
50-60Hz
According to guide 73/23/EEC for low voltage and guide 89/336/EEC (EMC) this
device is marked with
.
