Using YOYOCam G3
Users interact with YOYOCam using SMS commands and voice calls.
MASTER & USER
Up to 10 Users set up by the Master can access YOYOCam. Master and Users can send these commands:
Master & Users can also call YOYOCam and listen in via the built-in microphone.
Text to send
What it does
#00#
(after factory reset) sender becomes Master
#14#NewMasterNumber#
Change from present Master number to NewMasterNumber
#04#OldPassword#NewPassword#
Change the Guest password (default is 1234)
#06#UserNumber#
Add a User.
#113#UserNumber#
Delete a User
#106#EmergencyNumber#
Add Emergency Number (called when emergency button pressed on remote)
#107#EmergencyNumber#
Delete Emergency Number
#127#LanguageCode#
Set Language. 0=Swedish (default); 1 = English
Text to send
What it does
#01#
Arm YOYOCam (if an event is detected, alarm is triggered)
#02#
Disarm YOYOCam (events will be ignored)
#03#
Take one image and send it to the requesting user
#03#Quantity#
Take a number (Quantity 1-8) of images and send to requestor
#07#
Check the settings and status (summary list by SMS)
#09# or #09#1#
Get the command list (#09# for SMS, #09#1# for MMS response)
#32#Size#
Set image size: 1: 160x128; 2: 320x240 (default); 3: 640x480
#33#Quantity#
Set quantity of images to take when triggered: 1-8 (default 5; Note 1)
#118#0# or #118#1#
Disable (0) infrared body detection; enable (1) (default)
#22#0# or #22#1#
Disable (0) camera based motion detection (default); enable (1)
#39#0#
Call mode – When Emergency button pressed, numbers are dialed
#39#1#
SMS/MMS mode – when Emergency button is pressed, YOYOCam sends SMS and MMS.
#143#0# or #143#1#
Disable (0) indicator LED; enable (1) (default)
For example, send
#04#1234#6789# to change password to 6789. Send #06#0702222222# to add 0702222222
as a user.
YOYOCam has 3 user categories:
1 - One “
MASTER
” who can perform all operations and receive all alarm messages.
2 - Up to 10 “
USERs
” who can access all main functions but can not perform configuration commands.
3 - Unlimited number of “
GUESTs
” who only can request images.
NOTE:
All need to have “visible” phone numbers and need to know YOYOCam’s mobile phone number.
Turn on and off the
alarm
function of YOYOCam:
• send SMS with text #01# to arm, or send #02# to disarm
• or press the “lock” button of the remote control to arm, and the “unlock” button to disarm.
Capture and send one or more
images
:
• send SMS with text #03# and receive one image in return
• or send SMS with text #30#NumberOrEmail#ImageQuantity# to send image(s) to someone else.
MASTER
There is one Master user who has complete control over YOYOCam. Master-only commands: