STEP 1. Prepare YOYOCam G3
1.
An antenna is included and ready-mounted at delivery. To remove it, gently unscrew the nut by hand. To attach
it again or use a different antenna, align the plug with the antenna connector and screw it on gently by hand until
it is finger tight. Do not use tools.
2.
Slide the battery compartment cover downwards.
3.
Lift the battery cover away from the device.
4.
Move the battery out of the way as shown.
•
WARNING:
Always be sure to switch off YOYOCam and disconnect the power before inserting or removing
the SIM card. Do not touch the gold contacts of the SIM Card.
•
NOTE:
The SIM PIN must be disabled. Use an ordinary mobile phone to check and, if necessary, turn off
SIM Lock.
•
NOTE:
Check that the SIM card has credit and is enabled for MMS.
5.
Unlock and open the SIM card holder by sliding the clip upwards and then lifting it. Place the SIM card in the
holder as shown, gold contacts on the underside. Lower the retaining clip and lock it by sliding it downwards.
6.
Insert the power connector and lead the power cable out to the left or right, as required.
7.
Replace the battery and battery compartment cover.
Battery
1.
2.
3.
4.
5.
6.
OPEN
LOCK
SIM card
holder