Yowza Captiva Elliptical, Руководство пользователя

Страница: 4 / 43

4 YOWZA CAPTIVA CROSSTRAINER
BEFORE YOU BEGIN
Before assembling or using the exercise cycle, please read the following instructions carefully. They contain important information for
use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance
purposes or for ordering spare parts.
Product-Scope: This product is made for home use only and tested up to a maximum body weight of 400lbs.
Product-Performance: This ergo meter is speed independent, i.e. the performance is independent from pedal frequency.
Product-Feature: The resistance can be changed by the computer.

Use-Scope: The exerciser may not be used by persons with a weight of over 400lbs.

Use-Scope: This product is designed for the physical exercise by adults. Please ensure that children only use it under the
supervision of an adult.

Use-Environment: Ensure that those present are aware of possible hazards, e.g. movable parts during training.

Use-Environment: Ensure that sufficient space is available to use the home exerciser.

Use-Environment: Place the home exerciser on an even, non-slippery surface.

Use-Environment: Please ensure that liquids or perspiration never enter the machine or electronic.

Use-Environment: Keep the equipment indoors, away from moisture and dust. Do not put the equipment in a garage or covered
patio, or near water.

Use-Environment: The product is made for home use only. Warranty and manufacturer's liability do not extend to any product or
damage to the product caused by commercial purposes.

User-Health: Consult your physician before starting with any exercise programs to receive advice on the optimal training.

User-Health: Incorrect/excessive training can cause health injuries.

User-Health: If you feel sickness, chest pain, fits of dizziness or breathlessness during your training, immediately stop the
training and consult your physician.

Product-Preparation: Ensure that training only starts after correct assembly, adjustment and inspection of the home exerciser.

Product-Preparation: Follow the steps of the assembly instruction carefully.

Product-Preparation: Only use suitable tools for assembly and ask for assistance if necessary.

Product-Preparation: Only use original Yowza parts as delivered (see checklist).

Use-Preparation: Tighten all adjustable parts to prevent sudden movement while training.

Use-Instruction: Please follow the advice to correct training as detailed in the training instructions.

Use-Instruction: Do not use the home exerciser without shoes or loose shoes.

Use-Safety: Be aware of non-fixed or moving parts whilst mounting or dismounting the home exerciser.

Use-Safety: Use the height adjustment caps on the rear tube to ensure stable position of the home exerciser

Use-Safety: Make sure the front wheels are placed in the correct position: see assembly instruction.

Product-Power-Safety: The unit requires a power supply of 100V
– 125V / 50-60Hz. It should be connected to a safety socket
with a single 10A fuse. Before commissioning the appliance pay attention to the fact that the correct plug-in power supply unit
(observe marking) has been connected properly

Product-Maintenance: If the equipment is in regular use, check all its components thoroughly every 1
– 2 month. Pay particular
attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handlebars.

Product-Maintenance: Incorrect repairs and structural modifications (e.g. removal or replacement of original parts) may endanger
the safety of the user.

Product-Maintenance: Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason,
worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done.

Product-Maintenance: Only use original Yowza spare parts.

Product-Maintenance: Do not under any circumstances carry out electrical repairs or alterations yourself. Always ensure that
such work is done by a properly qualified electrician.

Product-Maintenance: Disconnect the apparatus from the mains before doing repair, maintenance or cleaning work.